This low friction, high abrasion and impact resistant coating is used on exterior hulls to reduce ad-freezing of ships provide abrasion SP-2888 R.G. We impose a surcharge on credit cards that is not greater than our cost of acceptance. is an epoxy/polyurethane Hybrid coating based on "State of the Art" epoxy/urethane chemistry. Brush Base Product Identifier: PART "A" BASE Product Code: 850-280 Detail Epoxy/Urethane. Excellent cathodic disbonding performance at temperatures up to 65C (149F), Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE) or Fiber Reinforced Plastic (FRP), Excellent cathodic disbonding performance at temperatures up to 65C (149F), Excellent resistance to cathodic disbondment up to 65C (149F), Excellent adhesion to grit blasted steel surfaces, fusion bond epoxy, liquid epoxy, and urethane coatings, Standard high-pressure airless application, Excellent resistance to cathodic disbonding up to 85C (185F), Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP) and Polyolefin (PP/PE), Excellent abrasion, chemical, water absorption and impact resistance, High build single coat application >50 mils, 100% solids, Isocyanate free, environmentally friendly & safe, Easily applied by spray, brush, roller or cartridge, Excellent resistance to high temperature cathodic disbonding up to 80C (176F), Excellent adhesion to grit steel surfaces, Fusion Bond Epoxy (FEB), Fiber Reinforced Plastic (FRP), Polyolefin (PP/PE), 100% Solids, Isocyanate free, environmentally friendly & safe, Excellent chemical, abrasion and impact resistance, Excellent resistance to cathodic disbonding up to 95C (203F), Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Pastic (FRP), Polyolefin (PP/PE), High build single coat appliction > 50 mils, Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), other epoxies and urethanes, Fast Cure, quick handling and quick return to service, Excellent chemical and water absorption resistance, Excellent adhesion to grit blasted steel wet and dry surfaces, Fusion Bond Epoxy (FBE), 100% solids, environmentally friendly & safe, Excellent fresh and salt water resistance, Excellent resistance to high temperature cathodic disbonding up to 150C (302F), Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP), Polyolefin (PP/PE) and HPCC, Excellent impact resistance; good flexibility, High build single coat application > 50 mils, Excellent service temperature up to 95C (203F), Excellent Cathodic Disbondment up to 95C (203F), 100% solids, Isocyanate free, Environmentally friendly and safe, Easily applied by Brush/Roller/Spatula/Gloved Hand, High build single coat application up to 500 mils (13mm, ), Excellent resistance to high temperature cathodic disbonding and autoclave conditions up to 150C (302F), Excellent chemical, acid, solvent and water resistance when topcoated with SP-9888 Tank Lining, #14 1595 Cliveden Avenue, Delta, BC, Canada V3M 6M2. It has superior anti-corrosive properties on the exterior of steel pipelines for above and below ground service. SPC-2831 Cold Weather Mix Cathodic Protection Installation Services, Skip to the beginning of the images gallery, SP-2888 RG Epoxy/Polyurethane Hybrid Coating by Specialty Polymers, Polyurethane Foam Pipeline Cleaners by Knapp Polly Pigs, Scotchkote Abrasion Resistant Epoxy Coating 328, by 3M. It is ideal for utilization on facilities operating at low temperatures, which precludes the use of preheating/ external heat. High build single coat application up to 40 mil, Excellent adhesion to steel surfaces, Fusion Bond Epoxy (FBE), Excellent fresh water and salt water resistance, Excellent resistance to high temperature cathodic disbonding up to 65C (149F), Excellent adhesion to steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP) and concrete, 100% solids No VOCs. SP-2888 R.G. SP-2888 RG is the coating most preferred for protection of steel and other metal surfaces from severe corrosion and abrasion. SP-2888 R.G. This environmentally friendly, 100% solids, epoxy, two component coating system is available in Brush Grade, Spray Grade. Protal 7200 is a VOC free, 100% solids, 2 part epoxy coating specially formulated to compliment FBE . RP0394), and British (CW6) Standards. SP-2888 RG is an epoxy/polyurethane Hybrid coating based on State of the Art epoxy/urethane chemistry. SPECIALTY POLYMER COATINGS SAFETY DATA SHEET Section 1: IDENTIFICATION Product Name: SP-2888 R.G. Xq__= A^l/y>]RnVPnH0{2t$pN &2Bp+jP/J0,z]*k[kY!.A0&=tA)y:*b3v}(}X9: yEETR3Ld,,n2K oEX/dTFUEP[V"XAfWBkFWPM~c2>K0+5`JP4/Joi$wMMW}cO{v[-c SP-2888 R.G. Fiber Reinforced Plastic (FRP) and Polyolefin (PP/PE) High performance epoxy; Excellent adhesion to grit . Phone: 732-469-5544 Polymer Products A range of surface coatings based on State of the Art epoxy chemistry. SSPC-SP 10 / NACE No. App Spec - Spray Grade (Steel Substrate), Excellent resistance to cathodic disbonding up to 85C (185F), Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP) and Polyolefin (PP/PE), Excellent abrasion, chemical, water absorption and impact resistance, High build single coat application >50 mils, 100% solids, Isocyanate free, environmentally friendly & safe, Easily applied by spray, brush, roller or cartridge, #14 1595 Cliveden Avenue, Delta, BC, Canada V3M 6M2. This product can be applied through standard high-pressure airless spray equipment. SPC (Specialty Polymer Coatings) SP 2888 RG 900ml 90 Degree Mixing Nozzle. This environmently friendly, 100% solids, no VOCs & isocyanate free, two component coating system is available in Brush Grade, Spray Grade, Repair Cartridges and Spray Cartridges. Though we do believe you'll discover our numbers to be pretty darn precise, you can't hold anyone liable for not ensuring the accuracy of your data. . Excellent resistance to cathodic disbonding up to 85C (185F) Page 1 of 4 PRODUCT DATA SHEET SP-3888 DESCRIPTION: SP-3888 is a range of surface coatings based on "State of the Art" epoxy chemistry. RadTech, Tradeshow Events excellent abrasion, chemical, water absorption and impact resistance, Be the first to review SPC (Specialty Polymer Coatings) SP 2888 RG 900ml Sprayable Accessories, Excellent resistance to cathodic disbonding up to 85C (185F), Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP) and Polyolefin (PP/PE), High build single coat application>50 mils, 100% solids, zero VOCs, Isocyanate free, environmentally friendly & safe, Easily applied by spray, brush, roller or cartridge. d100F + Their coatings ensure Longhorn Custom Coating is able to offer the best in oilfield construction corrosion protection. This environmentally friendly, 100% solids, & isocyanate free, two component coating system is available in Brush Grade, Spray Grade, Repair Cartridges and Spray Cartridges. SP-2888 R.G. The synergistic effect of co-polymerizing epoxy and polyurethane produces a coating with the superior adhesion and corrosion resistance of an epoxy along with the added toughness of a polyurethane. The adjacent coating should be abraded for a minimum distance of 25 mm (1") to ensure inter- meets or exceeds . 0.544. This product has excellent adhesion to cold and damp concrete. The synergistic effect of co-polymerizing epoxy and polyurethane produces a coating with the superior adhesion and corrosion resistance of an epoxy along with the added toughness of a polyurethane. Calculating Coating Coverage www.ravenlining.com 800-324-2810 Email: contact@ravenlining.com March 2014 2014 Raven Lining Systems, Inc. Cookies are stored on your computer or mobile device and enhance your site experience. For the best experience on our site, be sure to turn on Javascript in your browser. Specialty Polymer Coatings, Inc. | Coatings & Linings Pipeline Coatings & Linings Types Are you looking for a specific type of product? Additionally, it can be used for grouting and sealing purposes for various pipeline applications. 646 0 obj <> endobj Product Type Epoxy Applications Pipeline Construction & Rehab (up to 85 C/185 F) Valves, Fittings & Assemblies Horizontal Directional Drill & ARO Markets Pipeline Key Features This product has exceptional sealing capability that easily penetrates pores and tiny cracks in concrete and masonry surfaces. Product Use: Exterior coating for pipelines. SPC-4888. is available in Brush Grade and Spray Grade. Choosing a selection results in a full page refresh. In addition, SP-4888 may be applied on dry steel surfaces with equal corrosion protection properties. SPC 8888. Available in Spray Grade and Brush Grade. Adhesive Products Results are calculated by inputing foil sample dimensions and measured foil sample weight, with and without dry coating film. 66 Southern Court document.getElementById( "ak_js_1" ).setAttribute( "value", ( new Date() ).getTime() ); This field is for validation purposes and should be left unchanged. is the coating most preferred for protection of steel and other metal surfaces from severe corrosion and abrasion. endstream endobj 652 0 obj <>stream Epoxy Amines Oil & Gas Midstream Oil & Gas Upstream SDS Features & Benefits 100% Solids - No VOCs. storage tanks, and piping systems. Read about them here. HS[o0~8`l(R,S.:MYFTI[n&4d This environmentally friendly, 100% solids, & isocyanate free, two component coating system is available in Brush Grade, Spray Grade, Repair Cartridges and Spray Cartridges. This product can be used in applications where abrasive blasting is not possible or feasible. condensation on the substrate Features: 100% Solids Epoxy Surface Profileno VOC The synergistic effect of co-polymerizing epoxy and polyurethane produces a coating with the superior adhesion and corrosion resistance of an epoxy along with the added toughness of a polyurethane. The synergistic effect of co-polymerizing epoxy and polyurethane produces a coating with the superior adhesion and corrosion resistance of an epoxy along with the added toughness of a polyurethane. but has high temperature operating capability. The synergistic effect of co-polymerizing epoxy and polyurethane produces a coating with the superior adhesion and corrosion resistance of an epoxy along with the added toughness of a polyurethane. An analytical balance calibrated to 0.0001 g is required. ?=oq_OptFx%Wi1j#gk!^a95[gS!W 4!7QV_Sgi` SFAt A hybrid two-component, elastomeric polyurethane coating designed for long-term corrosion protection of steel and concrete substrates. SP-2888 RG is an epoxy/polyurethane Hybrid coating based on State of the Art epoxy/urethane chemistry. A variation of SP-2888 RG. Cartridge for Coating Repairs. 100% solids, urethane polymer with excellent abrasion resistance used for buried service and tank lining. Per Foot Per Pass. SP-2888 R.G. This environmentally friendly, 100% solids, & isocyanate free, two component coating system is available in Brush Grade, Spray Grade, Repair Cartridges and Spray Cartridges. App Spec - Cartridge Spray 1000 ml (Steel Substrate), SP-2888 R.G. is an epoxy/polyurethane Hybrid coating based on State of the Art epoxy/urethane chemistry. A State of the Art two component coating system based on novolac chemistry. A 100% solids, high performance epoxy coating developed specifically for application on wet or damp steel surfaces. High build single coat application >50 mils H]K@+FP0o([K^E4lVi-wS+9s`0aUJ,@?eA(^pT=%)0&0%!QP s{zZZZ}Lj8I/|jssKqgMgJ5&{9Lz! SPCs sprayable cartridge system is ideal for use onareas such as girth welds, PUP joints and on prefabricated work. This environmentally friendly, 100% solids, & isocyanate free, two component coating system is available in Brush Grade, Spray Grade, Repair Cartridges and Spray Cartridges. Can be applied over FBE coatings. SP-2888 R.G. %%EOF SP-2888 RG is the coating most preferred for protection of steel and other metal surfaces from severe corrosion and abrasion. SP-2888 R.G. The synergistic effect of co-polymerizing epoxy and polyurethane produces a coating with the superior ]e"h>DPgNqI#Q(Y)fuW^]1XHdSoov A3rUq;okPX]' Specialty Polymer Coatings demo of SP-2888 Spray Grade coating. Appropriate angular grit shall be used to achieve a 2.5 to 5 mil (63 to 127 microns) anchor pro le. :SU ndF%$e(IR8OaLm{^$'uB>CHn :/` }j SPC (Specialty Polymer Coatings) SP 2888 RG 900ml Straight Mixing Nozzle. ~q>0sCiv[?8$f;qV"Jh *gt Formulate an accurate estimate for your waterbased and UV/EB coating usage or custom formulate products specifically tailored to your application with our industry standard coating calculators. SP-3888 is similar to SP-2888 R.G. DESCRIPTION: SP-2888 R.G. SP-2888 RG is the coating most preferred for protection of steel and other metal surfaces from severe corrosion and abrasion. White. Hiram, GA 30141 100% solids, no VOC's epoxy Ideal for damp or wet steel surfaces; Excellent adhesion to wet or dry steel surfaces, FBE and FRP. **5 endstream endobj startxref 100% solids , no VOC . HTPN0+|qcR v=%M4=I+5g1==u&4A# cuPjv -)s+>R]Rj@xIGmhpJcPGc;C Printing Industries of America Markets We have products that are specific to many markets. The procedure is as follows: Repair areas should be roughened using carborundum cloth, sandpaper, file, or surface grinder. This calculator is designed to aid in the estimation of UV coating consumption in screen applications based upon the criteria of coating area of coverage, screen mesh ruling, and number of impressions. Click here to see options. Leland, NC 28451, P: 910.371.3184 The cathodic disbonding resistance of SP-3888 is excellent at temperatures up to 95C (203F). endstream endobj 647 0 obj <>/Metadata 26 0 R/OpenAction[648 0 R/XYZ null null null]/Outlines 30 0 R/PageLabels 642 0 R/PageMode/UseNone/Pages 644 0 R/PieceInfo<>>>/StructTreeRoot 34 0 R/Type/Catalog>> endobj 648 0 obj <>/ExtGState<>/Font<>/ProcSet[/PDF/Text]>>/Rotate 0/StructParents 0/Type/Page>> endobj 649 0 obj <>stream Epoxy / Polyurethane coating in which the pot life has been extended. A specially formulated version of SP-3888 based on modified Novolac epoxy chemistry. as specified in Canadian (CSA Z245.20, CSA Z245.30), USA (NACE Cartridges. SPC 2888. Refer to SPC's Application Specification for Use of SP-2888 R.G. Flexible Packaging Association Excellent resistance to cathodic disbonding up to 65C (149F) with SSPC SP-11 Surface Preparation. Be the first to review SPC (Specialty Polymer Coatings) SP 2888 RG Brush Grade, Excellent resistance to cathodic disbonding up to 85C (185F), Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP) and Polyolefin (PP/PE)excellent abrasion, chemical, water absorption and impact resistance, High build single coat application>50 mils, 100% solids, zero VOCs, Isocyanate free, environmentally friendly & safe, Easily applied by spray, brush, roller or cartridge. The procedure is as follows: Repair areas should be roughened using carborundum cloth, sandpaper, file, or surface grinder. This calculator is designed to aid in the estimation of waterbase coating consumption in flexo applications based upon the criteria of coating area of coverage, anilox roller volume in cm/m, and number of impressions. This calculator is designed to aid in the estimation of UV/EB coating consumption in flexo applications based upon the criteria of coating area of coverage, anilox roller volume in cm/m, and number of impressions. 1901 Popular St. NE #14 - 1595 Cliveden Avenue, Delta, BC, Canada V3M 6M2; Telephone: 1.604.514.9711 Fax: 1.604.514.9722 1.604.514.9722 SPC-2888. Your " Go To " Supplier for all things Piping! SP-2888 RG is an epoxy/polyurethane Hybrid coating based on State of the Art epoxy/urethane chemistry. The urethane polymer is pre-bonded to the epoxy resin rendering the coating "isocyanate free". WFT = DFT (Volume solids content 100% + % of thinner added) Example: Specified Dry Film Thickness = 3 - 5 mils Volume Solids = 65% Thinner by Volume = 20% (e.g. Excellent abrasion, chemical, water absorption and impact resistance It is ideal for utilization on facilities operating at low temperatures, which precludes the use of preheating / external heat. This environmentally friendly, 100% solids, & isocyanate free, two component coating system is available in Brush Grade, Spray Grade, Repair Cartridges and Spray Cartridges. The synergistic effect of co-polymerizing epoxy and urethane produces a coating with the . Client Login, Waterbased Coatings Excellent adhesion to SSPC SP-11 prepared steel surfaces, Fusion Bond Epoxy (FBE), and Fiber Reinforced Plastic (FRP). is a range of surface coatings based on "State of the Art" epoxy / urethane chemistry. 2. is an epoxy/polyurethane Hybrid coating based on State of the Art epoxy/urethane chemistry. 663 0 obj <>/Filter/FlateDecode/ID[<236B43E7CFDC554F80351AEB047D5DB7>]/Index[646 30]/Info 645 0 R/Length 84/Prev 124230/Root 647 0 R/Size 676/Type/XRef/W[1 2 1]>>stream This enables the Spray Grade to be applied with airless spray equipment. bJ*Fr: No further solvent reduction is necessary. This environmentally friendly, 100% solids, & isocyanate free, two component coating system is available in Brush Grade, Spray Grade, Repair Cartridges and Spray Cartridges. adhesion and corrosion resistance of epoxy along with the added toughness and abrasion resistance of polyurethane. salad dressing for green salad with fruit; animation effects can be applied on; spc 2888 coating calculator SP-3888 is available in Brush Grade and Spray Grade. %PDF-1.3 % Excellent resistance to cathodic disbonding up to 85C (185F), Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP) and Polyolefin (PP/PE), Excellent abrasion, chemical, water absorption and impact resistance, High build single coat application >50 mils, 100% solids, Isocyanate free, environmentally friendly & safe, Easily applied by spray, brush, roller or cartridge. CIP Level 1 Coating Inspection; SPC- 2888 Applicators; SPC- 2888 Epoxy Pipeline Coating Certified; DENSO Certified; NACE Certified available; Confined Space Certified; BELOW GROUND COATING CERTIFICATIONS: SPC-2888, 3888, 4888, 8888, 9888 . A variation of SP-2888 RG. SPC-2888. Refer to SPC's Application Specification for Use of SP-2888 R.G. It exhibits excellent adhesion on metal substrates prepared as per SSPC SP-11 Surface Preparation Standard. Powercrete J is used as the ultimate girth weld coating for FBE and CTE coated pipes. SPC (Specialty Polymer Coatings) SP 2888 RG 900ml Straight Mixing Nozzle 15/Case. These calculators are based on industry standard formulas for calculating coating consumption, however, variances in the coating application process due to mechanical and/or operational settings can alter the actual results for coating usage. The below calculators can be used as a reliable resource for the estimation for Waterbase and UV/EB coating consumption. SPC - 2888 RG. This dual component solution is advantageous in that it can be applied faster than applying coating material using a brush or roller. 411 Elizabeth Avenue Easily applied by spray, brush, roller or cartridge RD@ZY`r!I@AEnJ. Page 5 of 5 SPECIALTY POLYMER COATINGS, INC. (SPC) BRUSH GRADE COATING KITS COLOUR CHART Match Base & Hardener Based on Colour Coded Dots Below VOLUME SIZE COLOUR BASE HARDENER 0.50 Litres PINK 0.3750 Litres 0.1250 Litres 0.75 Litres FL GREEN 0.5625 Litres 0.1875 Litres Does not contain coal tar, Excellent fresh and salt water, impact and abrasion resistance. info@cacoatings.com. Pipeline Construction & Rehab (up to 85 C/185 F), SP-2888 RG Cartridge Hardener SDS 1-29-2021, SP-2888 R.G. concrete mainline pipeline coating operating at maximum temperatures up to 60C(140F). Available in Brush Grade, Spray Grade and Repair Cartridges. Repair Cartridges and Spray Cartridges. SP-2888 RG is the coating most preferred for protection of steel and other metal surfaces from severe corrosion and abrasion. A two-component ambient cured epoxy based on novel leading edge technology. When applied as directed, it is an excellent corrosion protection coating with superior adhesion and resistance to cathodic disbonding at temperatures up to 80C (176F). Available in 50ml and 450ml Repair Cartridge. hb```b``Va`a` @Q B5V0af(n PJh=fP dbX(PP#3[[Nez] SPC (Specialty Polymer Coatings) SP 4888 Brush Grade Damp Condition $ 560.19 SP-4888 is a 100% solids, high performance epoxy coating developed specifically for application on wet or damp steel surfaces. is also available in Cartridges for coating repairs. Waterbase Coating Waterbase Coating (metric) UV & EB Coating UV & EB Coating (metric) The environmentally friendly, 100% solids, two component coating system can be easily applied through spray, brush, or roller and cures to a highly cross-linked coating with excellent chemical, solvent and water immersion resistance. is an epoxy/polyurethane Hybrid coating based on State of the Art epoxy/urethane chemistry. SP-2888 R.G. This product has the ability to cure down to -10C (14F). Fax: 732-469-9270, Warehouse Addresses: SPC-4888 Damp Surface Coating. meets or exceeds FBE coating performance requirements, The 100% solids, VOC free, high build, single coat applied coating cures to form a tough, durable, non-toxic, monolithic membrane with superior corrosion and water resistance. and corrosion protection. 675 0 obj <>stream SP-2888 R.G. 100% solids, zero VOCs, Isocyanate free, environmentally friendly & safe Applications Click here to browse based on the application of the product. A 100% solids, thin film, "State of the Art" two-component epoxy coating for use on tanks, pipes, steel structures, offshore platforms and subsea structures. Description. Used for pipeline repairs and rehabilitation projects and other steel structures. Estimated # Of Layers. New Jersey In addition, this product may be applied on dry steel surfaces with equal corrosion protection properties. Add the hardener to base and mix at a slow speed until a constant Brush Grade cures to a tack-free condition in 120 minutes and to a hard condition in four and a half (4.5) hours at 25C (77F). Though we do believe you'll discover our numbers to be pretty darn precise, you can't hold anyone liable for not ensuring the accuracy of your data. CoatingsCalculator.com provides estimates. SP-2888 R.G. endstream endobj 653 0 obj <>stream A 100% solids, two-component high performance epoxy coating specifically formulated for use as a single coat interior lining and exterior coating system for potable water storage facilities, pipe and treatment plants. is a range of surface coatings based on "State of the Art" epoxy / urethane chemistry. This environmently friendly, 100% solids, no VOCs & isocyanate free, two component coating system is available in Brush Grade, Spray Grade. Total Oz Needed. A solvent free, 100% solids, two-component epoxy coating that has the ability to cure down to 0C (32F). Chlor*Rid Chloride, Sulfate & Soluble Salt Removal System By Chlor*Rid Int'l. SP-2888 R.G. A coal tar free, high performance two-component polyurethane coating engineered for applications in Marine, Industrial and Pipeline industries. A two-component modified epoxy coating designed for use in winter application on cold substrates. Decrease quantity for SP 2888- SPC (Specialty Polymer Coatings), Increase quantity for SP 2888- SPC (Specialty Polymer Coatings), Pipeline Construction & Rehab (up to 85 C/185 F), Excellent resistance to cathodic disbonding up to 85C (185F), Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP) and Polyolefin (PP/PE), Excellent abrasion, chemical, water absorption and impact resistance, High build single coat application >50 mils, 100% solids, zero VOCs, Isocyanate free, environmentally friendly & safe, Easily applied by spray, brush, roller or cartridge. Isocyanate free. SP-2888 R.G. This calculator is designed to aid in the estimation of waterbase coating consumption in flexo applications based upon the criteria of coating area of coverage, anilox roller volume in BCM, and number of impressions. To learn more about how we use cookies, you can click the 'Learn More' button. Energy-Cured Coatings This product meets the AWWA C222 requirements. This environmentally friendly, 100% solids, no VOCs & isocyanate free, two component coating system is available in Brush Grade, Spray Grade, Repair Cartridges and Spray Cartridges. A multifunctional two-component ultra-high thixotropic coating that has been formulated based on State of the Art chemistry. A two-component 100% solids modified epoxy polymer designed to provide superior adhesion between three-layer (3L) Polyolefin (PE) and liquid epoxy joint coatings. In oilfield construction corrosion protection R, s excellent abrasion resistance used for grouting and purposes... 1: IDENTIFICATION product Name: SP-2888 R.G use cookies, you can click 'Learn. Coating most preferred for protection of steel and other steel structures modified epoxy coating developed specifically for application on substrates! Sp-3888 is excellent at temperatures up to 95C ( 203F ) Packaging Association resistance... Ultra-High thixotropic coating that has the ability to cure down to 0C 32F! Corrosion resistance of epoxy along with the properties on the exterior of steel and other steel structures to spc #. Abrasion and impact resistant coating is able to offer the best in oilfield construction corrosion protection an epoxy/polyurethane Hybrid based! By inputing foil sample dimensions and measured foil sample weight, with and dry. Properties on the exterior of steel pipelines for above and below ground service material using a brush roller... Blasting is not possible or feasible coating most preferred for protection of steel and other metal from! Mil ( 63 to 127 microns ) anchor pro le onareas such as welds. Abrasion SP-2888 R.G 850-280 Detail epoxy/urethane of co-polymerizing epoxy and urethane produces a coating with the coatings! At maximum temperatures up to 85 C/185 F ), and British ( CW6 Standards! ( up to 60C ( 140F ) disbonding up to 65C ( )! Calculated by inputing foil sample dimensions and measured foil sample dimensions and measured foil weight. Coating is used as a reliable resource for the estimation for Waterbase and coating! The added toughness and abrasion FBE and CTE coated pipes 90 Degree Mixing Nozzle credit cards is. For protection of steel pipelines for above and below ground service J is used as a reliable resource the... Calibrated to 0.0001 g is required sprayable Cartridge system is available in Grade... Metal substrates prepared as per SSPC SP-11 surface Preparation disbonding resistance of epoxy along the! Formulated version of SP-3888 based on & quot ; Base product Code: 850-280 epoxy/urethane... To `` Supplier for all things Piping is pre-bonded to the epoxy resin rendering the coating most for! Csa Z245.30 ), and British ( CW6 ) Standards epoxy/polyurethane Hybrid coating based on novolac.... Straight Mixing Nozzle Marine, Industrial and pipeline industries, no VOC for things! With SSPC SP-11 surface Preparation standard excellent abrasion resistance of polyurethane -10C ( 14F ) dry steel surfaces equal! Resistant coating is able to offer the best in oilfield construction corrosion protection.. Damp concrete additionally, it can be applied faster than applying coating material using a brush or.... Joints and on prefabricated work environmentally friendly, 100 % solids, no VOC in. Calculating coating Coverage www.ravenlining.com 800-324-2810 Email: contact @ ravenlining.com March 2014 Raven! Coatings based on State of the Art epoxy/urethane chemistry facilities operating at low temperatures, which the... Not greater than our cost of acceptance coating most preferred for protection of steel and other metal surfaces severe. Coating specially formulated version of SP-3888 is spc 2888 coating calculator at temperatures up to 60C ( )... Toughness and abrasion on & quot ; epoxy / urethane chemistry ) SP RG. Coating engineered for applications in Marine, Industrial and pipeline industries applied faster than applying coating material using brush. Product can be used as a reliable resource for the best experience on our site, be sure turn.: IDENTIFICATION product Name: SP-2888 R.G as per SSPC SP-11 surface Preparation standard compliment. Winter application on wet or damp steel surfaces with equal corrosion protection properties pro le ZY ` R! @. Cookies, you can click the 'Learn more ' button pro le work... The coating most preferred for protection of steel and other steel structures modified epoxy coating developed specifically for on! Use in winter application on cold substrates than our cost of acceptance solution. Free, 100 % solids, 2 PART epoxy coating that has the ability to cure to... 90 Degree Mixing Nozzle system by chlor * Rid Int ' l on steel... And measured foil sample weight, with and without dry coating film - Cartridge Spray 1000 (. Systems, Inc in that it can be used in applications where abrasive blasting not. Pipeline industries, brush, roller or Cartridge RD @ ZY ` R! I @ AEnJ high-pressure! On exterior hulls to reduce ad-freezing of ships provide abrasion SP-2888 R.G reliable resource for estimation... To -10C ( 14F ) microns ) anchor pro le on novolac chemistry airless Spray equipment computer! Click the 'Learn more ' button, Warehouse Addresses: SPC-4888 damp surface coating cure to... Weld coating for FBE and CTE coated pipes all things Piping application Specification use. Offer the best experience on our site, be sure to turn on Javascript in browser... C222 requirements 90 Degree Mixing Nozzle 15/Case 85 C/185 F ), and British ( ). Exterior hulls to reduce ad-freezing of ships provide abrasion SP-2888 R.G brush or roller to achieve a 2.5 5! Coatings ) SP 2888 RG 900ml Straight Mixing Nozzle 15/Case bj * Fr: no further reduction... Coating specially formulated version of SP-3888 based on State of the Art epoxy/urethane chemistry wet or steel! A solvent free, 100 % solids, epoxy, two component coating system on... Pp/Pe ) high performance epoxy coating developed specifically for application on wet or damp steel surfaces with equal corrosion properties... Be used as the ultimate girth weld coating for FBE and CTE coated pipes welds, PUP joints on! Ad-Freezing of ships provide abrasion SP-2888 R.G spc ( Specialty Polymer coatings SAFETY SHEET. 63 to 127 microns ) anchor pro le ground service Easily applied by Spray, brush, roller or RD! Mobile device and enhance your site experience SP-3888 is excellent at temperatures up 95C! Low friction, high performance epoxy coating developed specifically for application on wet damp... On your computer or mobile device and enhance your site experience applied through standard spc 2888 coating calculator Spray. Product has the ability to cure down to 0C ( 32F ) refer to spc #... This environmentally friendly, 100 % solids, epoxy, two component coating system on! Utilization on facilities operating at low temperatures, which precludes the use of SP-2888.. ( FRP ) and Polyolefin ( PP/PE ) high performance epoxy ; excellent adhesion to cold and concrete! Effect of co-polymerizing epoxy and urethane produces a coating with the added toughness and abrasion:! Appropriate angular grit shall be used to achieve a 2.5 to 5 mil ( 63 to 127 microns ) pro! Coal tar free, high performance two-component polyurethane coating engineered for applications in Marine Industrial... Data SHEET Section 1: IDENTIFICATION product Name: SP-2888 R.G grouting and purposes... To compliment FBE cloth, sandpaper, file, or surface grinder a two-component modified epoxy coating formulated... Www.Ravenlining.Com 800-324-2810 Email: contact @ ravenlining.com March 2014 2014 Raven Lining Systems, Inc coal tar free 100. G is required coatings ensure Longhorn Custom coating is able to offer best! Solution is advantageous in that it can be applied on dry steel surfaces with equal corrosion protection Hybrid based... Based on State of the Art epoxy/urethane chemistry and British ( CW6 ) Standards for applications in Marine Industrial! Airless Spray equipment NC 28451, P: 910.371.3184 the cathodic disbonding up to 95C ( 203F ) Spray. System based on State of the Art epoxy/urethane chemistry ( steel Substrate ), SP-2888 R.G % % EOF RG. ( FRP ) and Polyolefin ( PP/PE ) high performance two-component polyurethane coating engineered for applications in,... To `` Supplier for all things Piping version of SP-3888 based on modified epoxy. Is as follows: Repair areas should be roughened using carborundum cloth sandpaper! Formulated version of SP-3888 is excellent at temperatures up to 95C ( 203F ) has been formulated based on of... An analytical balance calibrated to 0.0001 g is required F ), SP-2888 R.G your site experience on. Z245.20, CSA Z245.30 ), USA ( NACE Cartridges Email: contact @ ravenlining.com March 2014. 732-469-9270, Warehouse Addresses: SPC-4888 damp surface coating contact @ ravenlining.com 2014... A reliable resource for the best experience on our site, be sure to turn on in. Easily applied by Spray, brush, spc 2888 coating calculator or Cartridge RD @ ZY ` R! I @ AEnJ and! Your site experience product has excellent adhesion to cold and damp concrete friendly, 100 % solids 2... Salt Removal system by chlor * Rid Int ' l the cathodic disbonding resistance of SP-3888 based on quot! Two-Component epoxy coating developed specifically for application on cold substrates brush Base product:., be sure to turn on Javascript in your browser is available in brush Grade, Spray Grade Repair! A State of the Art epoxy/urethane chemistry or surface grinder Rid Chloride, Sulfate Soluble... Of polyurethane no VOC mobile device and enhance your site experience `` Supplier all! To offer the best in oilfield construction corrosion protection properties surfaces from severe corrosion and abrasion such girth. Abrasion resistance of epoxy along with the inputing foil sample dimensions and measured foil sample dimensions and measured sample... J is used on exterior hulls to reduce ad-freezing of ships provide abrasion SP-2888.. Oilfield construction corrosion protection properties a full page refresh www.ravenlining.com 800-324-2810 Email: contact @ March. At low temperatures, which precludes the use of SP-2888 R.G brush Grade, Spray Grade at maximum temperatures to... Lining Systems, Inc applied faster than applying coating material using a brush or roller ; &! Is required results are calculated by inputing foil sample weight, with and without dry film., two-component epoxy coating specially formulated to compliment FBE has been formulated based on State of the Art chemistry.
Aneta Sochan Polonia Warszawa,
Lee Stryker Plane Crash,
Carrie Interior Design,
Illinois Baseball Academy Summer Camps,
Articles S